VD-302 – Our Product

Our product, developed for three-phase asynchronous motors, is an effective Energy Saving Optimization Device for applications with constant or variable loads. It delivers up to 35% kWh electricity savings during operating phases where the motor runs at nominal load or transitions into partially no-load conditions.

Application Capacity:      0.75 kW to 7.5 kW

Motor Electrical Connection:   Y (Star) and/or ∆ (Delta) Connection.

Application Examples:   FAN, PUMP, COMPRESSOR, CONVEYOR, and CUTTING systems are typical areas of use.

TECHNICAL SPECIFICATIONS:
🔹 A robust structure housed in an IP65 enclosure, dustproof and moisture-resistant.
🔹 Easy and simple to install, with no need for additional hardware.
🔹 16 A – L-L 400 VAC – 50/60 Hz capacity.
🔹 It features static cooling and does not require an additional cooling fan.
🔹 It requires no maintenance or inspection — plug and forget.
🔹 It has been specifically developed for asynchronous motors.
🔹 It can be mounted on vibrating and impact-prone housings (optional).
🔹 Upon request, additional protection with resin/epoxy can be applied (optional).
🔹 It can control multiple motors simultaneously (within the maximum capacity).
🔹 Operable in ambient temperatures from −30°C to +85°C. 
🔹 Usable at altitudes of ±1,000 m above sea level.
🔹 In the event of a possible failure, repair is practical and cost-effective.
🔹 Guaranteed 5% kWh savings on IE2 and IE3 motors operating at 100% load.
🔹 Guaranteed 10–25% kWh savings on IE2 and IE3 motors operating at 75–85% load.
🔹 Guaranteed 25–35% kWh savings on vibration motors.
🔹 Up to 45% savings under variable load conditions, especially during no-load operation.
🔹 VibroDrive reduces the motor winding temperature by up to 5°C.
🔹 It extends bearing life.
🔹 (Does not generate voltage harmonics)